Monitor Audio Bronze BR2 Manuel d'instructions télécharger pdf (Page 8)

Outrigger Foot Fixing (BR5 and BR6 Only)

The Bronze Reference Series outrigger foot incorporates a spike for use on

carpeted floors and also, a soft polymer pad (for use on wooden or tiled floors).

Spike

Soft Polymer

Pad

Outrigger Foot

BEWARE. The spikes are very sharp, and could cause injury if care is not

taken when handling them.

Please ensure there are no hidden wires under the carpet, or trailing

mains leads that could be damaged by the spikes.

1. You can carefully place the cabinet on it’s top or back to fit the

outriggers. Locate the outrigger foot over the threaded inserts in the

cabinet.

2. Screw these in place using the supplied screws.

3. Place the soft polymer pad into it’s locating positions. These pads are

for use on hard floors. If you have hard floors, you can now enjoy your

speakers. If you have carpet please continue to follow these

instructions.

4. Fit the spikes into the inserts on the outrigger feet. If you have a very

thick pile carpet, you may need to remove the soft polymer pad to

ensure the spikes fully penetrate the carpet.

5. Carefully turn your speaker back over and check that it is evenly

balanced. If uneven, you can adjust the height in the appropriate

corner by unscrewing the spike slightly. This operation may need to be

repeated a several times to ensure your cabinet is completely level.

When you are happy with the balance of the cabinet, tighten the

locking nut on each spike. The soft polymer pad may need to be

removed to do this.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 16 17

Pas de commentaire

Monitor Audio Bronze BR2 Manuel d'instructions Page 8