Monitor Audio BXFX Spécifications télécharger pdf (Page 10)

Bronze BX8

PLINTH FIXING

(BX5 & BX6 only)

The Bronze BX5 & BX6’s are provided with plinths to improve stability and acoustic response.

The plinths are secured in place by using the supplied bolts.

Before you ﬁt the plinth ensure the ﬂoor area is clear of any hard/sharp objects. To ﬁt the

plinth turn the cabinet over so that the bottom is facing upwards. Then, place the plinth

onto the cabinet ensuring the plinth is orientated correctly, lining up the bolt holes in the

plinth with the inserts in the cabinet. Using the bolts, secure the plinth to the cabinet.

Tighten them up gradually at ﬁrst and ensure the plinth is ﬁtted securely to the cabinet. Fit

the feet to the plinth before turning the loudspeaker back over. (Please read the instructions

opposite). The spikes are used to improve sound quality and bass performance

SPIKES AND FEET

The ﬂoorstanders from the Bronze BX Series come with spikes and separate rubber feet.

The spikes are to be used on carpeted ﬂoors and the rubber feet for use on hard ﬂoors

where spikes are not appropriate.

The spikes screw into the threaded inserts on the underside of the plinth. If you do not wish

to use the plinth, spikes can be ﬁxed directly into the bottom of the cabinet. Ensure there

are no trailing cables where the speakers will be sited.

NOTE: When used without the plinth the stability of the cabinet will be reduced

because the cabinet footprint will be reduced.

When used on hard ﬂoor, the rubber feet simply push into the same inserts that would

usually be occupied by the spikes.

Bronze BX Manual.indd 8 10/03/2010 10:55:34

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 16

Pas de commentaire

Monitor Audio BXFX Spécifications Page 10